Products & Equipment — Forming

Faresin Robusto

Heavy-duty crane-set panels for industrial and petrochemical slabs.

Faresin Robusto steel panel system with connection hardware

Forming — Heavy Clamp-Crane Set

Panel12 cm (4-23/32″) steel profile; widths 300–2400 mm, heights H600–H3300 FrameWelded steel, galvanized connection hardware Pour PressureUp to 1,650 psf, depending on application Tie CapacityTaper Ties (32 kip) Best ForIndustrial & petrochemical slabs HandlingCrane-set; lifting hooks rated 1.5t (3,307 lbs.) each, used in pairs

Product Overview

Faresin Robusto is a heavy-duty steel forming system built on a 12 cm (4-23/32″) profile, sized for industrial and petrochemical wall pours where panels are crane-set rather than hand-carried. Panels are available in standard heights of 600, 1200, 2700, 3300mm, each offered in a full range of widths from 300 mm up to 2400 mm, so crews can build up virtually any wall length or return without custom fabrication.

The connection system uses galvanized alignment and compensation clamps, fixed clamps, and a Taper tie system paired with Dywidag threaded rods rated to a maximum tensile strength of 32 kip. External fixed corners, internal stripping corners, and hinge-mounted variable-angle corners (15°–90°) let crews form both square and angled walls with the same panel fleet.

Panels move by crane using a dedicated lifting hook rated to 1.5 t (3,307 lbs.) per hook under a 60° sling angle, with two hooks used for each panel or ganged composition.